-
We are based at Drumoak in the Aberdeenshire Countryside. Contact us by calling: 07759 429685
Metal Polishing Aberdeen
At Metal Polishing Aberdeen we have been polishing metals for over twenty years.
We can polish Alloys, Aluminium, Brass, Copper, Bronze, Steel and Stainless Steel to a satin or mirror finish.
We have worked with Car and Bike Restorers, Antique Dealers, Boat Owners, Architects, Interior Designers and private clients.
With our range of equipment and processes including Soda Blasting and Electrolytic Cleaning coupled with our years of experience we can take on any metal cleaning job, large or small.
If you have anything from Brass Candlesticks to Classic Car and Motorcycle Parts to be polished, give us a call on 07759 429685.
Our Processes Include Vapour Blasting
Vapour blasting is a process for removing contaminates from a surface ,or finishing a surface using pressurised water and abrasive blast media.
The biggest advantage of vapour blasting is it produces a finer finish on a surface than dry blasting.The water flushes out the abrasive, so there is no impregnation of the blast surface, leaving a cleaner surface.
Vapour blasting lends itself to a wide variety of uses Automotive, Motorcycle etc.
Vapour blasting is a natural choice for cleaning grease, rust, factory coatings or other contaminates from old motorcycle parts.
The cleaning and stripping process goes quickly with vapour blasting and the finish is much softer. Aluminium, chrome or steel surfaces have a satin finish at the end of the process.
Our Processes Include Soda Blasting
Soda blasting is a eco friendly gentle way of removing paint, oil, grease, soot - just about anything - from metal, wood, brick, stone etc. The great thing about soda blasting is that it does not damage the surface being cleaned.
We use it a lot for cleaning old paint off motorbike engines, car panels or any mechanical parts. Because it is not abrasive and water soluble there is no chance of any internal engine damage.
We also use it a lot for cleaning paint of antique fire places with wooden surrounds as it does not harm the wood. Soda blasting is a great way of restoring wood back to its former glory without putting it in nasty chemicals.
So if you have any painted metal, wood or stone needing stripped we would be happy to give you a price for the job.
Case Studies
1930s Steel Stacking Chairs
A set of 1930s steel stacking chairs came to us with a coating of brown paint. To remove the paint covering we soda blasted the chairs back their bare steel. This specialist process involves blasting bicarbonate of soda at the chairs to remove the paint in a non abrasive fashion leaving the bare metal without pitting and thus ready for traditional polishing methods.
Ornate Firedogs
We were approached by a client to clean with a badly corroded pair of ornate brass firedogs. They were initially placed in an electrolytic cleaning tank and then taken through our three step polishing process. The first step employs a hard mop and large particle abrasives to remove the corroded layer, then a softer mop with smaller abrasive particles to obtain a smoother surface and finally a very soft mop with fine abrasive particles to provide an final polish. The polished surface shine can be preserved by use of a lacquering process if required.
One of our recent projects
We are based at Drumoak in the Aberdeenshire Countryside.
Contact us by calling: 07759 429685